Brother 565 User Manual Download Page 75

Page: 75 / 119

7 - 3

QUICK-DIAL NUMBERS AND DIALING OPTIONS

Changing One-Touch and Speed-Dial numbers

If you try to store a One-Touch or Speed-Dial number where a number is already
stored, the LCD will show the name stored there (or number) and will ask you to do
one of the following:

Press

to change the stored number.

—

Press

to exit without making a change.

Enter a new number.

Press

Menu/Set

■

If you want to erase the whole number or whole name, press

Stop/Exit

when the cursor is under the first digit or letter. The characters above and
to the right of the cursor will be deleted.

■

If you want to change a character, use

to position the cursor

under the character you want to change, and then type over it.

Follow the directions beginning at Step 3 in Storing One-Touch Number or
Storing Speed-Dial numbers.

Summary of Contents for 565
























































































































Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands

Brother 565, User Manual

Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands