Removal and Replacement Procedures
●
●
●
●
●
Port, application, and encryption blade removal and replacement................................. 78
●
●
●
●
●
●
●
●
●
Brocade DCX 8510-8 chassis removal and replacement............................................. 113
Introduction
NOTE
Read the safety notices before servicing
.
The field-replaceable units (FRUs) in the Brocade DCX 8510-8 can be removed and replaced without
special tools. The Brocade DCX 8510-8 can continue operating during many of the FRU replacements if
the conditions specified in the procedures are followed.
The following sections contain FRU removal and replacement procedures (RRPs).
ESD precautions
The Brocade DCX 8510-8 contains ESD-sensitive FRUs. When working with any Brocade DCX 8510-8
FRU, use correct electrostatic discharge (ESD) procedures.
• Wear a wrist grounding strap connected to chassis ground (if the Brocade DCX 8510-8 is plugged in)
or a bench ground.
• Store ESD-sensitive components in antistatic packaging.
DANGER
For safety reasons, the ESD wrist strap should contain a series 1 megaohm resistor.
CAUTION
Static electricity can damage the chassis and other electronic devices. To avoid damage, keep
static-sensitive devices in their static-protective packages until you are ready to install them.
Brocade DCX 8510-8 Backbone Hardware Reference Manual
75
53-1002180-08
Summary of Contents for DCX 8510-8
Page 1: ...53 1002180 08 19 September 2014 Brocade DCX 8510 8 Backbone Hardware Reference Manual ...
Page 22: ...Network manageability 22 Brocade DCX 8510 8 Backbone Hardware Reference Manual 53 1002180 08 ...
Page 34: ...Installing ICL cables 34 Brocade DCX 8510 8 Backbone Hardware Reference Manual 53 1002180 08 ...
Page 172: ...Danger Notices 172 Brocade DCX 8510 8 Backbone Hardware Reference Manual 53 1002180 08 ...
