manualshive.com logo in svg

Brocade Communications Systems DCX 8510-8, Hardware Reference Manual

Share
Download
Brocade Communications Systems DCX 8510-8 Hardware Reference Manual Download Page 7

Preface

● 

Document conventions......................................................................................................7

● 

Brocade resources............................................................................................................ 9

● 

Contacting Brocade Technical Support.............................................................................9

● 

Document feedback........................................................................................................ 10

Document conventions

The document conventions describe text formatting conventions, command syntax conventions, and
important notice formats used in Brocade technical documentation.

Text formatting conventions

Text formatting conventions such as boldface, italic, or Courier font may be used in the flow of the text
to highlight specific words or phrases.

Format

Description

bold

 text

Identifies command names

Identifies keywords and operands

Identifies the names of user-manipulated GUI elements

Identifies text to enter at the GUI

italic

 text

Identifies emphasis

Identifies variables and modifiers

Identifies paths and Internet addresses

Identifies document titles

Courier font

Identifies CLI output

Identifies command syntax examples

Command syntax conventions

Bold and italic text identify command syntax components. Delimiters and operators define groupings of
parameters and their logical relationships.

Convention

Description

bold

 text

Identifies command names, keywords, and command options.

italic

 text

Identifies a variable.

Brocade DCX 8510-8 Backbone Hardware Reference Manual

7

53-1002180-08

Summary of Contents for DCX 8510-8

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands