55
10. Remove the Snap Rings from both sides of the Rear Roller.
To avoid possible injury, be sure to wear eye protection before removing
the Snap Ring.
Note:
The Snap Ring may be behind the Right Side Bearing Plate on some
machines. If it is behind, remove the Right Side Bearing Plate before attempting to
remove the Snap Ring.
11. Using a 13 mm (1/2”) wrench and a 13 mm (1/2”) socket and wrench, remove
the 2 indicated bolts from the Left Rear Roller Bracket.
12. Remove the Left Rear Roller Bracket.
13. Slide the Rear Roller out of the belts.
14. Remove and replace with the new Rear Roller.
15. Assembly is the reverse procedure. Consult the Replace the Drive Belt proce-
dure.
Left Rear Roller Bracket
Right Side Bearing Plate
Snap Ring
