39
5. Remove the lower mounting bolt from the Cylinders. Leave the tops attached.
6. Disconnect the Cylinder from the Treadle, and lower the Treadle gently.
The Treadle will fall abruptly if not supported. Keep hands away from the
inside of the Treadles to avoid possible serious injury.
7. Using a 13 mm (1/2”) wrench, remove the indicated bolts from both sides of
the Treadle Assembly.
8. Carefully lift the front of the Treadle Assembly onto the Transport Wheels. Roll
the Treadle Assembly off of the rear of the machine.
Note:
THIS STEP REQUIRES TWO PEOPLE.
Do not move the machine without aid. Injury to you or damage to the
machine can occur. The Treadles and Walking Belts can abruptly move.
To avoid possible serious injury, keep hands away from the inside of the
Treadles and the edges of the Walking Belts.
The Walking Belts can abruptly move. To avoid possible serious injury,
keep hands away from the edges of the Walking Belts.
9. Installation is the reverse procedure.
10. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are
properly assembled.
Do not use until the machine has been fully assembled and inspected
for correct performance in accordance with the Owner’s Manual.
