31
6. Tilt unit carefully onto the right side.
Do not move the machine without aid. Injury to you or damage to the
machine can occur. The Treadles and Walking Belts can abruptly move.
To avoid possible serious injury, keep hands away from the inside of the
Treadles and the edges of the Walking Belts.
7. Remove the lower mounting bolt from the left Cylinder. Leave attached at top.
8. Remove the 5 indicated screws using a #2 Phillips screwdriver from the left
Side Cover.
9. Remove the left Side Cover.
10. Turn the Drive Pulley clockwise while forcing the Drive Belt to the outside.
Belt will come off of the Drive and Motor Pulley.
Keep fingers out of any pinch opportunities when turning the Pulleys.
11. Wrap the new Drive Belt around the Motor Pulley. Start the Drive Belt on the
Drive Pulley and roll it in a clockwise motion. Be sure the Belt does not come off
of the Motor Roller.
Keep fingers out of any pinch opportunities when turning the Pulleys.
12. Roll the Drive Pulley clockwise until the Drive Belt is fully installed. Continue
to roll the Belt forward while adding side pressure with fingers to align as neces-
sary.
13. Replace the Side Cover and secure with side cover screws.
14. Reconnect Cylinder and secure with Cylinder mounting bolt.
15. With assistance, carefully set the machine upright.
Do not move the machine without aid. Injury to you or damage to the
machine can occur. The Treadles and Walking Belts can abruptly move.
To avoid possible serious injury, keep hands away from the inside of the
Treadles and the edges of the Walking Belts.
16. Replace Spacer, Pivot Cover, and screws.
17. Replace the Motor Cover and secure with screws.
18. Replace Rear Cover and secure with screws.
Drive Pulley
Motor Pulley
19. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner’s Manual.
