71
NOTICE:
This document provides instructions for the replacement of the Hydraulic Cylinder on the Bowflex
®
TC20 fitness machine.
If you need assistance, please call
Bowflex
Customer Service at 1-800-605-3369.
1. Remove the lower Cylinder bolt using a 5 mm hex wrench.
2. Disconnect the Cylinder from the Treadle, and lower the Treadle gently.
The Treadle will fall abruptly if not supported. Keep hands away from the
inside of the Treadles to avoid possible serious injury.
3. Remove the upper Cylinder bolt using a 5 mm hex key.
4. Installation is the reverse of this procedure
Note:
The white arrow on the Cylinders must be up and to the inside of the ma-
chine. Be sure to attach the cylinder to the Treadle before the Upright.
5. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are
properly assembled.
Do not use until the machine has been fully assembled and inspected for
correct performance in accordance with the Owner’s Manual.
!
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the wall outlet
and the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power cord in a secure
location.
