13
H16
Over speed condition
1. If error occurs when machine is powered up or when start button is
pressed, replace MCB
2. If error occurs due to pushing belts beyond motor speed, advise not to
push belts beyond motor speed
3. Seek advanced troubleshooting assistance
H17
Motor wiring
1. Check motor wiring connections to MCB
2. Replace motor
3. Replace MCB
H18
Wiring short
1. Check all wiring connections at MCB
2. Replace MCB
H19
Voltage issue
1. Check all wiriing connections at MCB, AC plug assembly, and power cord
2. If error has occurred multiple times, replace MCB
H20
MCB backup monitor error
1. If error has occurred multiple times replace MCB
H22
Voltage issue
1. If error has occurred multiple times replace MCB
H23
No tach signal
1. Check motor power wire connection and tach I/O cable connection at both
ends
2. Check that tach wheel is mounted securely to motor shaft. If not, tighten
wheel.
3. Replace motor
H24
Current issue
1. Troubleshoot any other error first. If other errors resolved, and error has
occurred multiple times, replace MCB.
H26/28/H29
Circuitry issue
1. If error has occurred multiple times replace MCB
H30
Estop Error
1. Check and make sure the E-Stop is plugged in and fitted correctly.
2. Replace console
3. Replace MCB
H31
Speed higher than current
1. Check all motor connections at MCB
2. Seek advanced troubleshooting assistance
