74
8. Disconnect the Cylinders from the Uprights, and lower the Cylinders and
Treadles gently.
The Treadle will fall abruptly if not supported. Keep hands away from
the inside of the Treadles to avoid possible serious injury.
9. Using a 5 mm hex wrench, remove the five bolts in the indicated areas on the
left side of the Console/Handlebar/Upright Assembly. Repeat on the right side of
the Console/Handlebar/Upright Assembly.
10. Remove the Console/Handlebar/Upright Assembly from the Base Assembly
and gently lower it to the floor. THIS STEP REQUIRES TWO PEOPLE.
Do not move the machine without aid. Injury to you or damage to the
machine can occur. The Treadles and Walking Belts can abruptly move.
To avoid possible serious injury, keep hands away from the inside of the
Treadles and the edges of the Walking Belts.
Upper and Lower
I/O Cable Connection
