78
SECTION A:
Remove Parts from Current Machine Assembly
Be sure to place all parts and hardware in a secure location away from build area. Do not dispose of any parts until the assembly of the new machine
is complete. Unused parts may be discarded or returned to Nautilus.
1
. Remove the Power Cord from the Treadle Assembly
Disconnect all power and allow to sit for 5 minutes before you service this machine.
Note:
Place the Power Cord in a secure location so it can be re-attached on the final assembly.
*
2. Remove the Rear Cover from the Treadle Assembly
Note:
Place the Rear Cover in a secure location so it can be re-attached on the final assembly.
X2
#2
*
*
