54
Right Rear Roller Bolt
Drive Pulley Bolt
Left Side Bearing Plate
Rear Plate
6. While holding a 13 mm (1/2”) wrench on the Right Rear Roller Bolt steady, turn another 13 mm (1/2”) wrench on the Drive Pulley Bolt counter-clockwise. Remove
the Drive Pulley.
7. Loosen the Belt Tensioning Screws on both Treadles using a 5 mm hex wrench
(total of 4 screws).
NOTE:
Be sure to record how many turns it takes to loosen the screws to assist
with reassembly.
8. Remove the 3 indicated bolts from the Left Side Bearing Plate and Rear Plate
using two 13 mm (1/2”) wrenches.
9. Remove the Left Side Bearing Plate.
