46
en | Configuring the AutoDome 700 Series
AutoDome 700 Series IP PTZ Camera
F.01U.273.798 | 3.0 | 2012.08
User Manual
Bosch Security Systems, Inc.
Standard profile
From this field, you can select the encoder profile to be used for recording (see
Section 4.19 Encoder Profile, page 33
).
Pre-alarm Time
You can select the required pre-alarm time from the list field.
Post-alarm Time
You can select the required post-alarm time from the list field.
Post-alarm profile
You can select the encoder profile to be used for recording during the post-alarm time (see
Section 4.19 Encoder Profile, page 33
).
The
Standard profile
option adopts the selection at the top of the page.
Alarm input / Motion alarm / Video loss alarm
Here you can select the alarm sensor that is to trigger a recording.
Virtual alarm
Here you can select the virtual alarm sensors that are to trigger a recording, via RCP+
commands or alarm scripts, for example.
Recording includes
You can specify whether, in addition to video data and metadata (for example alarms, VCA
data and serial data) should also be recorded. Including metadata could make subsequent
searches of recordings easier but it requires additional memory capacity.
4.35
Retention Time
You can specify the retention times for recordings. If the available memory capacity of a
medium has been used, older recordings are only overwritten if the retention time entered
here has expired.
CAUTION!
You can specify limitations for overwriting older recordings in
Continuous
mode by
configuring the retention time (see
Section 4.35 Retention Time, page 46
).
NOTICE!
The recording profile can deviate from the standard setting
Active profile
and is only used
during an active recording.
NOTICE!
For more information, please see the
Alarm Task Script Language
document and the RCP+
documentation. These documents can be found on the product CD supplied.
CAUTION!
Without metadata, it is not possible to include video content analysis in recordings.
NOTICE!
Make sure that the retention time corresponds with the available memory capacity. A rule of
thumb for the memory requirement is as follows: 1 GB per hour retention time with 4CIF for
complete frame rate and high image quality.
Summary of Contents for VG5 700 Series
Page 1: ...AutoDome 700 Series IP PTZ Camera VG5 700 Series en User Manual ...
Page 2: ......
Page 81: ......
