Bosch VG5 700 Series, User Manual

Page: 41 / 82

AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 41
Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08
Tilt Limits
Click the Reset button to clear the upper tilt limit.
Tour A / Tour B
Starts and stops the recording of a recorded (guard) tour.
The AutoDome can make up to two (2) recorded tours. A Recorded Tour saves all manual
camera movements made during the recording, including its rate of pan, tilt and zoom speeds
and other lens setting changes.
Note : You can save a total of 15 minutes of recorded actions between the two tours.
To record a tour:
1. Click the Start Recording button. The system prompts you to overwrite the existing tour.
2. Click Yes to overwrite the existing tour movements.
3. Click the View Control link, under the image cameo, to access the directional and zoom
controls.
4. Use the View Control dialog box to make the necessary camera movements.
5. Click the Stop Recording button to save all actions.
Compass
The VG5 AutoDome allows a user to display the compass heading of the camera in the lower-
right corner of the image display. The AutoDome displays the The cardinal or intercardinal (N,
NE, E, SE, S, SW, W, NW) heading in which the camera is pointing.
You must first calibrate the AutoDome to North before the camera displays accurate compass
headings. The AutoDome uses this calibration, usually set to magnetic North, as the zero
degree pan position and as the North compass heading. The AutoDome then displays the
compass heading based on the number of degrees from the North calibration point.
To set the North calibration point:
1. Determine the North compass heading, then move the camera to that position.
2. Click the Set North Compass Point button to set the calibration point.
3. Click the On radio button for the Compass parameter.
4.25 Diagnostics
Accesses the Built-in Self Test (BIST). The BIST displays a Pass or Fail status on the most
recent homing event, not a counter. For the other items, a counter is maintained.
Click the BIST button to display the number of times the AutoDome 700 Series:
– performed a homing event.
– failed to home properly.
– restarted.
– lost video.
4.26 Preposition and Tours
The AutoDome 800 Series can store up to 99 preset scenes and this section allows you to
define the individual scenes that comprise a preposition tour .
You define individual preposition scenes, then use these scenes to define the preposition
tour. The tour starts from the lowest scene number in the tour and progresses sequentially to
NOTICE!
The compass feature is not compatible with Bosch Intelligent Tracking. If Intelligent Tracking
is activated, the camera automatically disables the display of the compass heading. Once
Intelligent Tracking is deactivated, the camera returns the compass heading to the display.