24
en | Configuring the AutoDome 700 Series
AutoDome 700 Series IP PTZ Camera
F.01U.273.798 | 3.0 | 2012.08
User Manual
Bosch Security Systems, Inc.
Password
An AutoDome 700 Series is generally protected by a password to prevent unauthorized access
to the unit. You can use different authorization levels to limit access.
The AutoDome 700 Series operates with three authorization levels:
service
,
user
and
live
.
The highest authorization level is
service
. After entering the correct password, you can access
all the functions of the AutoDome 700 Series and change all configuration settings.
With the
user
authorization level, you can operate the unit and also control cameras, for
example, but you cannot change the configuration.
The lowest authorization level is
live
. It can only be used to view the live video image and
switch between the different live image displays.
You can define and change a password for each authorization level if you are logged in as
service
or if the unit is not password protected.
Enter the password for the appropriate authorization level here.
Confirm password
In each case, enter the new password a second time to eliminate typing mistakes.
4.2
Basic Mode: Date/Time
Device date/Device time/Device time zone
If there are multiple devices operating in your system or network, it is important to
synchronize their internal clocks. For example, it is only possible to identify and correctly
evaluate simultaneous recordings when all units are operating on the same time. If necessary,
you can synchronize the unit with your computer's system settings.
Click the
Sync to PC
button to copy your computer's system time to the AutoDome 700
Series.
Time server IP address
The AutoDome 700 Series can receive the time signal from a time server using various time
server protocols, and then use it to set the internal clock. The unit polls the time signal
automatically once every minute.
Enter the IP address of a time server here.
Time server type
Select the protocol that is supported by the selected time server. Preferably, you should
select the
SNTP server
as the protocol. This supports a high level of accuracy and is required
for special applications and subsequent function extensions.
CAUTION!
Do not use any special characters, for example
&
, in the name.
Special characters are not supported by the system's internal recording management and may
therefore result in the Player or Archive Player being unable to play back the recording.
NOTICE!
Proper password protection is only guaranteed when all higher authorization levels are also
protected with a password. If a
live
password is assigned, for example, a
service
and a
user
password must also be set. When assigning passwords, you should therefore always start
from the highest authorization level,
service
, and use different passwords.
NOTICE!
A new password is only saved when you click the
Set
button. You should therefore click the
Set
button immediately after entering and confirming a password.
Summary of Contents for VG5 700 Series
Page 1: ...AutoDome 700 Series IP PTZ Camera VG5 700 Series en User Manual ...
Page 2: ......
Page 81: ......
