Bosch VG5 700 Series User Manual Download Page 55

Page: 55 / 82

AutoDome 700 Series IP PTZ Camera

Configuring the AutoDome 700 Series | en

Bosch Security Systems, Inc.

User Manual

F.01U.273.798 | 3.0 | 2012.08

Mail server IP address

Enter the IP address of a mail server that operates on the SMTP standard (Simple Mail

Transfer Protocol). Outgoing e-mails are sent to the mail server via the address you entered.

Otherwise leave the box blank (

0.0.0.0

SMTP user name

Enter a registered user name for the chosen mailserver here.

SMTP password

Enter the required password for the registered user name here.

Format

You can select the data format of the alarm message.

–

Standard (with JPEG)

E-mail with attached JPEG image file.

–

SMS

E-mail in SMS format to an e-mail-to-SMS gateway (for example to send an alarm by

cellphone) without an image attachment.

Attach JPEG from camera

Click the checkbox to specify that JPEG images are sent from the camera. An enabled video

input is indicated by a check mark.

Destination address

Enter the e-mail address for alarm e-mails here. The maximum address length is 49

characters.

Sender name

Enter a unique name for the e-mail sender, for example the location of the unit. This will make

it easier to identify the origin of the e-mail.

Test e-mail

You can test the e-mail function by clicking the

Send Now

button. An alarm e-mail is

immediately created and sent.

4.43

Alarm Task Editor

As an alternative to the alarm settings on the various alarm pages, you can enter your desired

alarm functions in script form here. This will overwrite all settings and entries on the other

alarm pages.

Click the

Examples

link under the

Alarm Task Editor

field to see some script examples. A

new window will open.

CAUTION!

When a cellphone is used as the receiver, make sure to activate the e-mail or SMS function,

depending on the format, so that these messages can be received.

You can obtain information on operating your cellphone from your cellphone provider.

CAUTION!

Editing scripts on this page overwrites all settings and entries on the other alarm pages. This

procedure cannot be reversed.

In order to edit this page, you must have programming knowledge and be familiar with the

information in the

Alarm Task Script Language

document.

Summary of Contents for VG5 700 Series



















































































Search results

Summary of Contents for VG5 700 Series

Reviews:

Related manuals for VG5 700 Series

Brands by name

Popular brands

Bosch VG5 700 Series, User Manual

Search results

Summary of Contents for VG5 700 Series

Reviews:

Related manuals for VG5 700 Series

Brands by name

Popular brands