Bosch VG5 700 Series User Manual Download Page 19

Page: 19 / 82

AutoDome 700 Series IP PTZ Camera

Using the AutoDome 700 Series | en

Bosch Security Systems, Inc.

User Manual

F.01U.273.798 | 3.0 | 2012.08

2.10

Recordings page

Click

Recordings

to access the

Recordings

page from the

Livepage

Settings

page (the

Recordings

link is only visible if a storage medium has been selected).

Selecting Recordings

All saved sequences are displayed in a list. A track number is assigned to each sequence. Start

time and stop time, recording duration, number of alarms, and recording type are displayed.

To play back recorded video sequences:

Select

Recording

1 or 2 in the drop-down menu. (The contents for 1 and 2 are identical,

only the quality and location may be different.)

Use the arrow buttons to browse the list.

Click a track. The playback for the selected sequence starts.

Export to FTP

Click

Export to FTP

to send the current track to the FTP server. If required, change the times

within the selected range.

2.10.1

Controlling playback

A time bar below the video image allows quick orientation. The time interval associated with

the sequence is displayed in the bar in gray. A green arrow above the bar indicates the

position of the image currently being played back within the sequence.

The time bar offers various options for navigation in and between sequences.

–

Change the time interval displayed by clicking the plus or minus icons. The display can

span a range from two months to a few seconds.

–

If required, drag the green arrow to the point in time at which the playback should begin.

–

Red bars indicate the points in time where alarms were triggered. Drag the green arrow

to navigate to these points quickly.

Control playback by means of the buttons below the video image. The buttons have the

following functions:

Start/Pause playback

Jump to start of active sequence or to previous sequence

Jump to start of the next video sequence in the list

Slide control

Continuously select playback speed by means of the speed regulator:

Bookmarks

In addition, set markers in the sequences, so-called bookmarks, and jump directly to these.

These bookmarks are indicated as small yellow arrows above the time interval. Use the

bookmarks as follows:

Jump to the previous bookmark

Summary of Contents for VG5 700 Series



















































































Search results

Summary of Contents for VG5 700 Series

Reviews:

Related manuals for VG5 700 Series

Brands by name

Popular brands

Bosch VG5 700 Series, User Manual

Search results

Summary of Contents for VG5 700 Series

Reviews:

Related manuals for VG5 700 Series

Brands by name

Popular brands