AutoDome 700 Series IP PTZ Camera
Configuring the AutoDome 700 Series | en
43
Bosch Security Systems, Inc.
User Manual
F.01U.273.798 | 3.0 | 2012.08
4.28
Miscellaneous
Address
Allows the appropriate dome to be operated via the numerical address in the control system.
Type a number between 0000 and 9999, inclusive, to identify the camera.
4.29
Logs
To save the log file information:
1.
Click Download to obtain the log information.
2.
Click Save.
3.
Navigate to the directory in which you want to store the log information.
4.
Type a name for the log file and click Save.
4.30
Audio
You can set the gain of the audio signals to suit your specific requirements. The current video
image is shown in the small window next to the slide controls to help you check the audio
source and improve assignments. Your changes are effective immediately.
If you connect via Web browser, you must activate the audio transmission on the
Livepage
Functions
page (see
Section 2.6 The Livepage, page 12
). For other connections, the
transmission depends on the audio settings of the respective system.
Audio
The audio signals are sent in a separate data stream parallel to the video data, and so increase
the network load. The audio data are encoded according to G.711 and require an additional
bandwidth of approx. 80 kbps for each connection. If you do not want any audio data to be
transmitted, select
Off
.
Line In
You can set the line input gain. Make sure that the display does not go beyond the green zone
during modulation.
Record Format
Select a format for audio recording. The default value is G.711. Select L16 or AAC (Advanced
Audio Coding) if you want better audio quality with higher sampling rates. The L16 standard
requires approx. eight times the G.711 bandwidth.
4.31
Pixel Counter
Counts the number of pixels in a defined image area. The pixel counter allows the installer to
easily verify that the camera installation fulfills any regulatory or specific customer
requirements, for example, calculating the pixel resolution of the face of a person passing a
doorway monitored by the camera.
4.32
Advanced Mode: Recording
4.33
Storage Management
You can record the images from the AutoDome 700 Series on various local storage media or
on an appropriately configured iSCSI system.
It is also possible to let the VRM Video Recording Manager control all recording when
accessing an iSCSI system. This is an external program for configuring recording tasks for
Summary of Contents for VG5 700 Series
Page 1: ...AutoDome 700 Series IP PTZ Camera VG5 700 Series en User Manual ...
Page 2: ......
Page 81: ......
