Bosch VG5 700 Series User Manual Download Page 13

Page: 13 / 82

AutoDome 700 Series IP PTZ Camera

Using the AutoDome 700 Series | en

Bosch Security Systems, Inc.

User Manual

F.01U.273.798 | 3.0 | 2012.08

Maximum Number of Connections

If you do not connect, the unit may have reached its maximum number of connections.

Depending on the unit and network configuration, each AutoDome 700 Series can have up to

25 Web browser connections or up to 50 connections via the Bosch Video Management

System.

Protected AutoDome 700 Series

If the AutoDome 700 Series is password protected against unauthorized access, the Web

browser displays a corresponding message and prompts you to enter the password when you

attempt to access protected areas.

Enter the user name and associated password in the corresponding text fields.

Click

. If the password is entered correctly, the Web browser displays the page that

was called up.

Protected Network

If a RADIUS server is employed in the network for managing access rights (802.1x

authentication), the AutoDome 700 Series must be configured accordingly, otherwise no

communication is possible.

Image Selection

You can view the image of the camera in different displays.



Click one of the tabs

Stream 1

Stream 2

, or

M-JPEG

below the video image to toggle

between the different displays of the camera image.

View Control

The View Control tab allows you to control camera functions (pan, tilt, zoom, focus, and iris),

navigate through on-screen menus and to view preset shots.

Watermarking flag set on media item

Motion flag set on media item

Discovery of storage not completed. If the information about recorded video is not

cached, a discovery procedure is started in order find all recorded video. During this

time, the “discovery” symbol is shown. While discovery is executed, gaps might be

shown in places which the discovery has not yet reached. The gap will automatically

be replaced by the true video, as soon as the correct information is available.

NOTICE!

An AutoDome 700 Series offers the option to limit the extent of access using various

authorization levels (see the AutoDome 700 Series online help).

Summary of Contents for VG5 700 Series



















































































Search results

Summary of Contents for VG5 700 Series

Reviews:

Related manuals for VG5 700 Series

Brands by name

Popular brands

Bosch VG5 700 Series, User Manual

Search results

Summary of Contents for VG5 700 Series

Reviews:

Related manuals for VG5 700 Series

Brands by name

Popular brands