AutoDome 700 Series IP PTZ Camera
Using the AutoDome 700 Series | en
17
Bosch Security Systems, Inc.
User Manual
F.01U.273.798 | 3.0 | 2012.08
–
Actively tracked object in motion are identified in the video by a blue outline.
–
When an object in motion is lost, a blue diamond appears designating the area where the
target was lost.
2.6.3
Using Special Functions
The AutoDome offers several special command buttons on the Livepage.
Scan 360
Click this button to start a continuous 360° pan. To stop the continuos pan, click a directional
control in the View Control tab.
Autopan
Click this button to pan the AutoDome between user-defined limits. To set the left and right
pan limits, refer to
Section 4.24 PTZ Settings, page 40
, so set the Autopan limits. To stop the
continuos pan, click a directional control in the View Control tab.
Tour A / Tour B
Click one of these buttons to start a recorded (guard) tour. A Recorded Tour saves all manual
camera movements made during the recording, including its rate of pan, tilt and zoom speeds
and other lens setting changes. Refer to
Section 4.24 PTZ Settings, page 40
, to program a
recorded tour. To stop a tour, click a directional control in the View Control tab.
2.7
Saving Snapshots
You can save individual images from the video sequence currently shown on the
Livepage
in
JPEG format on your computer's hard drive. The icon for recording single images is only
visible if the unit is configured to enable this process.
Click the icon. The storage location depends on the configuration of the AutoDome 700
Series.
2.8
Recording Video Sequences
You can save sections of the video sequence currently shown on the
Livepage
on your
computer's hard drive. The icon for recording video sequences is only visible if the unit is
configured to enable this process.
1.
Click the icon to start recording. The storage location depends on the configuration of
the AutoDome 700 Series. A red dot in the icon indicates that recording is in progress.
2.
Click the icon again to stop recording.
3.
To change the storage location for the recorded video, navigate to the Livepage settings
on the Settings page.
Image Resolution
Sequences are saved at the resolution that has been preset in the configuration for the
encoder (see
Section 4.3 Basic Mode: Network, page 25
).
Summary of Contents for VG5 700 Series
Page 1: ...AutoDome 700 Series IP PTZ Camera VG5 700 Series en User Manual ...
Page 2: ......
Page 81: ......
