AutoDome 700 Series IP PTZ Camera
Configuring the AutoDome 700 Series | en
29
Bosch Security Systems, Inc.
User Manual
F.01U.273.798 | 3.0 | 2012.08
1.
First check whether the correct time zone is selected. If it is not correct, select the
appropriate time zone for the system, and click the
Set
button.
2.
Click the
Details
button. A new window will open and you will see the empty table.
3.
Select the region or the city that is closest to the system's location from the list field
below the table.
4.
Click the
Generate
button to generate data from the database in the unit and enter it into
the table.
5.
Make changes by clicking an entry in the table. The entry is selected.
6.
Clicking the
Delete
button will remove the entry from the table.
7.
Select other values from the list fields below the table to change the entry. Changes are
made immediately.
8.
If there are empty lines at the bottom of the table, for example after deletions, you can
add new data by marking the row and selecting required values from the list fields.
9.
Now click the
OK
button to save and activate the table.
Time server IP address
The AutoDome 700 Series can receive the time signal from a time server using various time
server protocols, and then use it to set the internal clock. The unit polls the time signal
automatically once every minute.
Enter the IP address of a time server here.
Time server type
Select the protocol that is supported by the selected time server. Preferably, you should
select the
SNTP server
as the protocol. This supports a high level of accuracy and is required
for special applications and subsequent function extensions.
Select
Time server
for a time server that works with the protocol RFC 868.
4.12
Display Stamping
Various overlays or “stamps” in the video image provide important supplementary
information. These overlays can be enabled individually and are arranged on the image in a
clear manner.
Camera name stamping
This field sets the position of the camera name overlay. It can be displayed at the
Top
, at the
Bottom
or at a position of your choice that you can then specify using the
Custom
option. Or
it can be set to
Off
for no overlay information.
1.
Select the desired option from the list.
2.
If you select the
Custom
option, additional fields are displayed where you can specify the
exact position (
Position (XY)
).
3.
In the
Position (XY)
fields, enter the values for the desired position.
Time stamping
This field sets the position of the time overlay. It can be displayed at the
Top
, at the
Bottom
or
at a position of your choice that you can then specify using the
Custom
option. Or it can be
set to
Off
for no overlay information.
1.
Select the desired option from the list.
2.
If you select the
Custom
option, additional fields are displayed where you can specify the
exact position (
Position (XY)
).
3.
In the
Position (XY)
fields, enter the values for the desired position.
Summary of Contents for VG5 700 Series
Page 1: ...AutoDome 700 Series IP PTZ Camera VG5 700 Series en User Manual ...
Page 2: ......
Page 81: ......
