Bosch DOK-MOTOR-MCL Series, Project Planning Manual

Page: 101 / 196

9.2.3 Frame size and frame length
For adjusting on different feed force requirements, Bosch Rexroth offers MCL
motors in a modular system in different sizes and lengths.
Frame sizes The designation of frame size is derived from the active height l
Fe
and power
of MCL.
Fig. 9-4: l
Fe
= Active magnet heigth
According to this system, the MCL modular construction system contains the
following motor frame sizes:
●
MCP015 / MCS015
● MCP020 / MCS020
● MCP030 / MCS030
● MCP040 / MCS040
● MCP070 / MCS070
Frame lengths Primary and secondary parts of one size are graduated additionally to differ‐
net frame sizes. The length designation of the primary part in the type code is
done via code letters, like A, B, C. The length designation of the secondary
part in the type code is given directly by the length in mm.
For detailed information about available frame sizes and lengths
refer to the type code of the motor in chapter 6 "Type codes" on
page 63 .
DOK-MOTOR*-MCL********-PR05-EN-P Bosch Rexroth AG 99/193
Rexroth IndraDyn L Ironless Linear Motors MCL
Application and construction instructions