Bosch DOK-MOTOR-MCL Series, Project Planning Manual

Page: 131 / 196

10 Motor-controller-combinations
10.1 General information
Technical data and figures of motor characteristic curves of the respective
motors are shown in chapter chapter 4 "Technical data" on page 25 .
Dimensioning and selection for separate motors results from the
Gantry-arrangement .
Maximum allowed DC bus voltage
For MCL motors are, depending on their size, maximum DC bus voltages de‐
fined. Please also observe the information provided in tab. 4-1 "General tech‐
nical data" on page 29 .
Exceeding of voltage limits!
DANGER
Prepare a suitable connection with a protective switch via the primary part
carrier when using AC voltage > 50 V or DC > 120 V (DIN IEC 60364-4-41).
10.2 Motor-controller-combinations with NYCe 4000
NYCe 4120 NYCe 4140
48 V 72 V 150 V
MCP015A-L040
MCP015B-L040
■ ■ -
MCP020x-Vxxx x x
MCP030x-Vxxx x x
MCP040x-Vxxx x x
MCP070x-Vxxx x x
■ Optimal combination
x Allowed combination - reduced velocity, as the DC bus voltage
is reduced in opposite to the nominal voltage
- Combination not allowed
Tab. 10-1: Motor-Controller-Combinations with NYCe 4000
DOK-MOTOR*-MCL********-PR05-EN-P Bosch Rexroth AG 129/193
Rexroth IndraDyn L Ironless Linear Motors MCL
Motor-controller-combinations