Bosch DOK-MOTOR-MCL Series, Project Planning Manual

Page: 30 / 196

Primary part mass m
P
Mass of primary part Unit [kg].
Secondary part mass m
S
Mass of secondary part Unit [kg].
Relative duty factor Relative duty factor ED
F
S6
in %, relating on the specified maximum and con‐
tinuous nominal force. The relative duty factor ED
F_S6
is calculated via:
F
dN
Continuous nominal force of the motor in N
F
S6
Force F
S6
in N
Fig. 4-3: Calculation of possible duty factor relating on F
S6
A force F
S6
higher than the continuous nominal force of the motor is only then
available, if the continuous voltage of the drive-controller is higher than the
continuous nominal voltage of the motor.
Allowed ambient temperature T
UM
during operation
Allowed ambient temperature Unit [°C].
Degree of protection Degree of protection according to DIN EN 60034-5
Temperature class Temperature class according to DIN EN 60034-1.
RoHS conformity RoHS conformity according to EC guidelines 2002/95/EG.
The PWM-Frequency of the drive controller affects the resulting
motor data. All data in this documentation refer to a PWM-Fre‐
quency of 4 kHz.
Bosch Rexroth AG DOK-MOTOR*-MCL********-PR05-EN-P 28/193
Rexroth IndraDyn L Ironless Linear Motors MCL
Technical data