Bosch DOK-MOTOR-MCL Series, Project Planning Manual

Page: 88 / 196

① Power connector RLS1704; wire designation (on the motor
side) see fig.8-1
② Connect total shield over the cable gland with the connector
housing.
Fig. 8-3: RLS1704 connection assignment on connection cable MCP
Observe the assembly instruction, which is delivered with the
male connector.
8.1.3 Connection Power
Bosch Rexroth provides ready-made power cables available for motor con‐
nection. The cables RKL4800, RKL4801, RKL4802, RKL4803 and INK0650
are optimally adjusted to our products and their most different demands.
Please observe that ready-made cables or cable systems of other
manufacturers may not fulfill these demands completely. Rexroth
shall not be held responsible for resulting malfunction states or
damage.
You can find additional information ...
●
on the selection of power and encoder cables for Rexroth
motors in documentation "Rexroth Connection Cables
IndraDrive and IndraDyn" (DOK-CONNEC-CABLE*INDRV-
AU□□-□□-P),
● on "Electromagnetic Compatibility in Drive and Control Sys‐
tems" (DOK-GENERL-EMV********-PR□□-□□-P).
Bosch Rexroth AG DOK-MOTOR*-MCL********-PR05-EN-P 86/193
Rexroth IndraDyn L Ironless Linear Motors MCL
Connection technique