24
Mounting on a Wall
1.
Please ensure that the wall the device is to be mounted on
is solid, flat, clean, and dry.
2.
Mark places for three mounting holes on the wall (for two
upper holes and one of the bottom ones) in accordance
with the mounting pattern for the panel.
3.
Drill the holes, insert wall plugs into them and screw
provided woodscrews into the two upper holes so that the
distance between a screw head and the wall is about
7 mm.
4.
Remove the front cover from the panel as shown in
Figure 3).
5.
Hang the device on the two screws. Screw the next
woodscrew into the bottom mounting hole and tighten it
up until bumping to fasten the device to the wall.
Figure 3. How to Remove the Cover
Mounting on a DIN Rail
1.
Select the mounting location where free access to the tapping screw at the upper end of the device
front cover is provided.
2.
Install the device on the DIN rail as shown in Figure 4.
3.
Remove the device front cover as shown in Figure 3.
Figure 4. Mounting the Panel on a DIN Rail
Connection
Mounting of connecting and communication lines is carried out in accordance with Figure 5
(“UO-4S Connection Diagram”).
Turn the case until
clips onto the rail
2
Place the hooks of
the panel base under
the lower edge of the
DIN rail
1
Нажмите
больши
-
ми
пальцами
на
верхний
торец
крышки
Сдвиньте
крышку
вперёд
Выкрутите
винт
крепления
крышки
1
2
3
Slide the
cover
forward
Unscrew the screw
fixing the cover
Push the top end
of the front cover
down by your
thumbs