40
Tab «Zones and Partitions»
Standalone Mode: The match between the zones and partitions is given in the UO-4S. A Zone
Number means the number of an ID Contact Zone (in the Standalone mode this tab can be not filled in).
Master Mode: The match between device addresses, zones, and partitions is described in the
UO-4S. A string number in this case is the number of the ID Contact Zone
.
Slave 1 Mode: The match between device addresses, zones, and partitions is described in the
UO-4S. To receive events from the devices the UO-4S configuration must contains status zones of the
devices where the alarm loop number is specified as zero (“0”) and the number of this string will mean
the ID Contact number of the device state.
Slave 2 Mode: Numbers of zones and partitions are transmitted from the control panel; only
textual description of the zone can be added in the UO-4S. For the Slave 2 mode, assign in the control
panel configuration (using PProg.exe) the ID Contact numbers of all the zones, readers, panel status
zones, and relays which events are to be transmitted to the UO-4S. A test description of a zone in this
case is typed opposite the number of the string which matches to the zone ID Contact number in the
configuration of the control panel.
Figure 19. Zones and Partitions. Master Mode
The UO-4S doesn’t support partition descriptions so only partition numbers are specified for user
SMS.
When the UO-4S operates together with the control panel in Slave 1 or Slave 2 operation
modes, local alarm loops must be enrolled in the control panel database