BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 425

Page: 425 / 444

Central screen, see Control Display

Changes, technical, see For Your Own Safety

Change, wheels and tires

CHARGE, energy recovery

150

Charge state indicator, high-voltage battery

172

Charging cable, high-voltage battery

348

Charging cable, storing, see Storage

349

Charging cable unlocking manually

350

Charging cradle

313

Charging process display, see Charging

screen

171

Charging process, see Charging screen

171

Charging screen

171

Charging, see Vehicle, charging

346

Charging smartphone, see Wireless charging

tray

313

Charging status, indicator light on the charging

socket outlet

351

Charging status indicator, see Charging

screen

171

Charging to save fuel

341

Charging tray for smartphones, see Wireless

Chassis number, see Vehicle identification

number

Check Control

173

Checking the engine oil level electronically

393

Children, seating position

140

Children, transporting safely

140

Child restraint seats

140

Child restraint systems, mounting

141

Child restraint systems, see Transporting chil-

Child safety locks

Child seat installation

141

Child seat, mounting

141

Child seat mountings LATCH

142

Child seats, see Transporting children

safely

140

Chrome-plated surfaces, care

416

Chrome surfaces, care

416

Cigarette lighter

310

Cigarette lighter, front

310

Cigarette lighter, rear

311

Cleaning, displays, screens

417

Cleaning, Head-up display

Climate control

Climate control rules

138

Closing with the Key Card

Closing with the smartphone, see BMW Digital

Key

Clothes hooks

321

Coasting, rolling to a stop

150

Coat hooks

321

Combination switch, see Turn signals

158

Combination switch, see Washer/wiper sys-

tem

159

Comfort Access

104

Communication, see Owner's Manual for Navi-

gation, Entertainment and Communication

Comparison of entries, see Entry compari-

son

Compartments in the doors

318

Compatible devices, see Suitable devices

Compatible mobile phones

Compressor

369

Concierge Service, see Owner's Manual for

Navigation, Entertainment, Communication

Condensation water under the parked vehi-

cle

333

Condensation, windshield

296

Condition Based Service

398

Confirmation signal from the vehicle

115

ConnectedDrive, see Owner's Manual for Navi-

gation, Entertainment and Communication

Connection, electrical devices, see Sockets

311

Consumption display, average consump-

tion

170

Consumption display, current consumption

170

Consumption, see Trip data

185

Contactless opening and closing of the tail-

gate

106

Contacts, see Owner's Manual for Navigation,

Entertainment, Communication

Contact with water, high-voltage system

Contact with water, hybrid system

Seite 425

Everything from A to Z

REFERENCE

425

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands