BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 189

Page: 189 / 444

▷

"Off": the Sport displays are not dis-

played in the Head-up Display.

▷

"In SPORT mode": the Sport dis-

plays are only displayed in SPORT

driving mode.

▷

"Always": the Sport displays are con-

tinuously displayed in the Head-up

Display.

▷

"Reduced height": if not all of the infor-

mation is in the driver's field of view,

the information can be displayed in the

lower section of the Head-up Display.

Visibility of the display

The visibility of the displays in the Head-up

display is influenced by the following factors:

▷

Seat position.

▷

Objects on the protective glass of the

Head-up display.

▷

Dust or dirt on the protective glass of the

Head-up display.

▷

Windshield dirty on inside or outside.

▷

Sunglasses with certain polarization filters.

▷

Wet road.

▷

Unfavorable light conditions.

If the image is distorted, have the base set-

tings checked by an authorized service center

or another qualified service center or repair

shop.

Special windshield

The windshield is part of the system.
The shape and coating of the special wind-

shield enable the system to function.
In the event of damage, have the special wind-

shield replaced by an authorized service center

or by another qualified service center or a re-

pair shop.

Seite 189

Displays

CONTROLS

189

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands