manualshive.com logo in svg

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Introducing the BMW X5 xDrive45e PLUG-IN HYBRID 2022 – an extraordinary blend of luxury and sustainability. Discover the seamless combination of power and efficiency as you navigate the roads ahead. To ensure you unlock the full potential of this remarkable vehicle, download your free Owner's Manual from manualshive.com and enjoy every mile with confidence.

Share
Download
background image

4.

"Heating/ventilation"

5.

"Driver" or "Front passenger"

6.

"Temperature:"

7.

Set the desired temperature.

8.

"OK"

Do not rapidly change between different tem-

perature settings. Otherwise, the automatic cli-

mate control will not have sufficient time to ad-

just the set temperature.

Temperature of the ventilation

General information

The temperature of the ventilation in the upper

body area can be adjusted.
The air flow of the ventilation in the upper body

area heats or cools noticeably, depending on

the adjusted temperature.
This does not change the set interior tempera-

ture for the driver and front passenger.

Adjust temperature of the ventilation

1.

"CAR"

2.

"Settings"

3.

"Climate control"

4.

"Heating/ventilation"

5.

"Driver" or "Front passenger"

6.

"Temperature adjustment"

7.

Set the desired temperature.

The temperature is individually adjusted, e.g.

colder toward blue, warmer toward red.

Air conditioning

Principle

The air in the interior will be cooled and dehu-

midified and, depending on the temperature

setting, warmed again.

Functional requirement

The car's interior can be cooled with the drive-

ready or standby state switched on.

Switch air conditioning on/off

Using the button:

Press the button on the lower side.

Via iDrive:

1.

"CAR"

2.

"Settings"

3.

"Climate control"

4.

"Heating/ventilation"

5.

"A/C"

Depending on the weather, the windshield and

the side windows may fog up briefly when

drive-ready state is switched on.
Air conditioning is switched on automatically

with the AUTO program.
When using the cooling mode, condensation

that will exit below the vehicle.

Maximum cooling

Principle

The system is set to the lowest temperature,

optimum air flow and recirculated-air mode

with the drive-ready or standby state switched

on.

Functional requirement

The function is available with outside tempera-

tures above approx. 32 ℉/0 ℃ and with the

drive-ready or standby state switched on.

Switching maximum cooling on/off

Press the button.
The LED is illuminated when maxi-

mum cooling is switched on.

Seite 293

Climate control

CONTROLS

293

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Car-Interface CI-RL4-ELINK Manual preview
CI-RL4-ELINK
Brand: Car-Interface Pages: 23
RuggON VD04 Quick Start Manual preview
VD04
Brand: RuggON Pages: 2
V8 equipment EBEX.2 Instruction Manual preview
EBEX.2
Brand: V8 equipment Pages: 17
Alfa Romeo FIX&GO automatic Manual preview
FIX&GO automatic
Brand: Alfa Romeo Pages: 40
Cadillac 2009 CTS Personalization Manual preview
2009 CTS
Brand: Cadillac Pages: 20
Thule 1597 Instructions preview
1597
Brand: Thule Pages: 4
Rugged Ridge 53701.52 Installation Manual preview
53701.52
Brand: Rugged Ridge Pages: 5
Yakima K974 Manual preview
K974
Brand: Yakima Pages: 11
Toyota 2011 Camry SE V6 Brochure & Specs preview
2011 Camry SE V6
Brand: Toyota Pages: 33
Magneti Marelli Obd Road User Manual preview
Obd Road
Brand: Magneti Marelli Pages: 9
Oldsmobile 1994 88 Owner'S Manual preview
1994 88
Brand: Oldsmobile Pages: 276
Volkswagen PASSAT CC - Brochure preview
PASSAT CC -
Brand: Volkswagen Pages: 32
Husky 31564 Assembly, Installation, Operation And Maintenance Instructions preview
31564
Brand: Husky Pages: 8
Crux RVCFD-79 Manual preview
RVCFD-79
Brand: Crux Pages: 10
Yakima LockNLoad LightenUp Manual preview
LockNLoad LightenUp
Brand: Yakima Pages: 13
Coulomb Technologies ChargePoint CT500-DSTAND Installation Manual preview
ChargePoint CT500-DSTAND
Brand: Coulomb Technologies Pages: 26
Honda 1993 Civic Coupe Owner'S Manual preview
1993 Civic Coupe
Brand: Honda Pages: 201
Volkswagen 2013 GTI Brochure & Specs preview
2013 GTI
Brand: Volkswagen Pages: 11

Brands by name

Popular brands

Load more brands