BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Page: 263 / 444

Pathway lines are faded in for better estima-
tion of the space required.
When the image of the rearview camera is dis-
played, you can switch to the Park Distance
Control or to a different view with obstacle
markings if necessary:
1. Press the Controller to the left, if needed.
2. For instance "Park. sensors only"
Cross traffic warning: depending on the equip-
ment, you will be warned in the Park Distance
Control display against vehicles approaching in
the front or rear from the side.
Additional information:
Cross traffic warning, refer to page
283 .
System limits
Safety information
Warning
Due to its limits, the system may not react, or
it may react too late or in a manner that is not
consistent with normal use. There may be a
risk of accident or risk of damage to property.
Actively intervene as warranted. Refer to the
information in this Owner’s Manual regarding
the scope of the system’s operation and limi-
tations.
Trailer towing
The rear functions of Park Distance Control are
switched off with a trailer attached or when the
trailer socket is occupied.
Depending on vehicle equipment and national-
market version, the rear functions of Park Dis-
tance Control remain switched on when trailer
towing is enabled.
White icon is displayed.
Depending on the vehicle equipment,
the detection range of the sensors is
shown as a shaded area on the Control Dis-
play.
Additional information:
Activating trailer towing, refer to page
337 .
System limits of the sensors
Additional information:
▷ Ultrasonic sensors, refer to page 41 .
Limits of ultrasonic measurement
The detection of objects with ultrasonic meas-
urements can run into physical limits, e.g., in
the following situations:
▷ With obstacles and persons at the edge of
the lane.
▷ Low objects already displayed, for instance
curbs, can move into the blind area of the
sensors before or after a continuous tone
sounds.
Unwarranted warnings
Reaching the system limits can cause unwar-
ranted warnings.
To prevent unwarranted warnings, for instance
in car washes, turn off automatic Park Dis-
tance Control activation on obstacle detection.
Malfunction
White icon is displayed, and the detec-
tion range of the sensors is dimmed on
the Control Display.
A Check Control message is displayed.
Park Distance Control malfunction. Have the
system checked by an authorized service cen-
ter or another qualified service center or repair
shop.
Seite 263
Driver assistance systems CONTROLS
263
Online Edition for Part no. 01405A604A9 - VI/22