BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Page: 246 / 444

Reducing the distance
Press the button repeatedly until the
desired distance is set.
Instrument cluster will display selected dis-
tance.
Increasing the distance
Press the button repeatedly until the
desired distance is set.
Instrument cluster will display selected dis-
tance.
Automatic adaptation of the distance
Depending on the equipment and national-
market version: the system can be adjusted so
that the distance to the vehicle driving in front
is automatically adjusted within the configured
distance according to the traffic situation or the
ambient conditions, for instance poor visibility.
1. "CAR"
2. "Settings"
3. "Driver Assistance"
4. If necessary, "Driving"
5. "Speed Limit Assistance"
6. "Adjust distance acc. to situation"
Continuing cruise control
An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current
speed and stored speed is not too large be-
fore calling up the stored speed. Otherwise,
unintentional deceleration or acceleration may
occur.
Press the button on the steering wheel with
the system interrupted:
With Steering Assistant.
Without Steering Assistant.
Cruise control is continued with the stored val-
ues.
In the following cases, the stored speed value
is deleted and cannot be called up again:
▷ When the system is switched off.
▷ When drive-ready state is switched off.
Changing between Cruise Control
with/without Distance Control
Safety information
Warning
The system does not react to traffic driv-
ing ahead of you, but instead maintains the
stored speed. There may be a risk of accident
or risk of damage to property. Adjust the set
speed to the traffic conditions and brake as
needed.
Changing over the Cruise Control mode
Switching Cruise Control without Distance
Control off and on:
▷ Press and hold this button.
▷ Press and hold this button.
With Steering Assistant: switch on Distance
Control:
Press the button.
Without Steering Assistant: switch on Distance
Control:
▷ Press the button.
▷ Press the button.
After changing, a Check Control message is
displayed.
Seite 246
CONTROLS Driver assistance systems
246
Online Edition for Part no. 01405A604A9 - VI/22