BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 412

Page: 412 / 444

▷

Do not exceed a towing distance of

3 miles/5 km.

▷

When driving off to tow the vehicle, make

sure that the tow rope is taut.

Tow fitting

General information

The screw-in tow fitting should always be car-

ried in the vehicle.
The tow fitting can be screwed in at the front

or rear of the vehicle.
The tow fitting is located beneath the cargo

floor panel.
Observe the following notes when using the

tow fitting:

▷

Use only the tow fitting provided with the

vehicle.

▷

Turn the tow fitting at least 5 turns clock-

wise and screw it in as far as it will go. If

necessary, tighten with a suitable object.

▷

After use, unscrew the tow fitting counter-

clockwise.

▷

Use the tow fitting for towing on paved

roads only.

▷

Avoid lateral loading of the tow fitting, for

instance do not lift the vehicle by the tow

fitting.

▷

Check the attachment of the tow fitting in

regular intervals.

Additional information:
Onboard vehicle tool kit, refer to page

400

Safety information

NOTICE

If the tow fitting is not used as intended, there

may be damage to the vehicle or to the tow

fitting. There is a risk of damage to property,

among other potential damage. Follow the

notes on using the tow fitting.

Screw thread for tow fitting

Press on the mark on the edge of the cover to

push it out.

Tow-starting

Do not tow-start the vehicle.
Start the engine by jump-starting, if possible.
Have the cause of the starting difficulties cor-

rected by an authorized service center or an-

other qualified service center or repair shop.
Additional information:
Jump-starting, refer to page

409

Seite 412

MOBILITY

Breakdown Assistance

412

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands