BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 121

Page: 121 / 444

Overview

Opening/closing the glass sun-

roof/sun protection.

Functional requirements

The glass sunroof and the sun protection can

be operated under the following conditions.

▷

Standby state is switched on.

▷

Drive-ready state is switched on.

The vehicle key must be in the car's interior.

Lifting/closing glass sunroof

Push switch briefly upward.

▷

The closed glass sunroof tilts

and the sun protection opens

slightly.

▷

The opened glass sunroof

closes until it is in the tilted

position. The sun protection

does not move.

▷

The tilted glass sunroof closes.

Opening/closing the glass sunroof

and sun protection separately

▷

Slide switch back to the re-

sistance point and hold.
Holding down the switch

opens the sun protection. If

the sun protection is already

fully open, the glass sunroof

opens.

▷

Slide switch forward to the resistance point

and hold.
The glass sunroof closes while the switch

is being held. If the glass sunroof is already

closed or in the tilted position, the sun pro-

tection closes.

▷

Slide the switch back past the resistance

point.
The sun protection opens automatically. If

the sun protection is already fully open, the

glass sunroof opens automatically.
Pressing the switch again stops the motion.

▷

Push the switch forward past the resistance

point.
The glass sunroof closes automatically. If

the glass sunroof is already closed or in

the tilted position, the sun protection closes

automatically.
Pressing the switch again stops the motion.

Opening/closing the glass sunroof

and sun protection together

▷

Briefly press out the switch

twice in succession toward

the rear past the resistance

point.
The glass sunroof and sun

protection open together.
Pressing the switch again

stops the motion.

▷

Briefly press out the switch twice in succes-

sion toward the front past the resistance

point.
The glass sunroof and sun protection close

together.
Pressing the switch again stops the motion.

Seite 121

Opening and closing

CONTROLS

121

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands