BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 328

Page: 328 / 444

Storage compartment on the left side, refer

to page

325

Fold up the cargo floor panel.

Stow the cargo cover on the left and lower

it on the right side.

Push the cargo floor down and close the

storage compartment on the left side.

Inserting the cargo cover

Slide the cover forward horizontally into the

two side brackets. Make sure that the cover

audibly engages on both sides.

Cargo net, FlexNet

General information

The flexible cargo net can also be used for

securing the cargo.
Additional information:
Load, refer to page

323

Attaching the FlexNet

Hook the FlexNet to the side panel with the

upper hooks.

Hook the FlexNet in the lashing eyes with

the lower hooks.

Seite 328

CONTROLS

Cargo area

328

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands