BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 65

Page: 65 / 444

▷

Charging the vehicle is interrupted due to

the installation.

▷

Following the successful installation, charg-

ing the vehicle may not continue automati-

cally.

Prerequisites for the installation

▷

The battery is sufficiently charged.

▷

The outside temperature is above

14 ℉/-10 ℃.

▷

The vehicle is parked in a horizontal posi-

tion.

▷

The hazard warning system is turned off.

▷

The selector lever position P is engaged.

▷

The engine is turned off and sufficiently

cooled down.

If applicable, follow the notes for further pre-

requisites on the control display.
If the prerequisites are not met, such as a suffi-

cient vehicle battery charge state, the upgrade

will not be offered for installation.
Pay attention to an offer for installation, e.g.,

after longer trips.

Preparing the vehicle

▷

Park the vehicle safely away from the public

road.

▷

Cellular network reception must be ensured

so that a fault message can be sent, for

instance if the installation is terminated.

▷

Close the windows.

▷

Close the glass sunroof.

▷

Close the trunk.

▷

Remove energy consuming devices, such

as a mobile phone.

▷

Disconnect any trailer or load carrier.

▷

The vehicle key must be located in the vehi-

cle for the consent for installation.

▷

Switch off the exterior lighting.

▷

Remove the devices connected to the diag-

nostic socket.

Starting installation

The upgrade can be installed when all prereq-

uisites have been met.

"CAR"

"Settings"

"General settings"

"Remote Software Upgrade"

"Start upgrade now"
Follow the instructions on the Control Dis-

play.

Functional limitations

During the upgrade, the majority of functions is

temporarily unavailable, for instance:

▷

Hazard warning system.

▷

Central locking system and, if necessary,

Comfort Access.

▷

Parking lights.

▷

Horn.

▷

Alarm system.

▷

Emergency call.

▷

Power windows.

▷

Operation of the tailgate.

▷

Glass sunroof.

▷

Checking the fuel filler flap lock.

The driver's door can be locked and unlocked

from the outside using the integrated key.

After successful upgrade

The vehicle can be used again immediately.
Booked services such as. Advanced Real Time

Traffic Information or Remote Services are au-

tomatically reactivated during the next trip.
After an extended stationary period, charge

the vehicle battery with an extended drive.

Seite 65

BMW Remote Software Upgrade

CONTROLS

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands