BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 103

Page: 103 / 444

move the integrated key before pulling the

external door handle.

Removing

Press the button, arrow 1, and pull out the

integrated key, arrow 2.

Locking/unlocking via the door lock

Pull and hold the door handle outward with

one hand.

Guide one finger of your other hand from

the back under the cover cap and push the

cover cap out.

Use the thumb for counter support to pre-

vent the cover cap from falling out of the

door handle.

Remove the cover cap.

Unlock or lock the door lock using the

integrated key.

The other doors must be unlocked or locked

from the inside.

Alarm system

If the vehicle is unlocked with the integrated

key via the door lock, the activated alarm sys-

tem will be triggered when the door is opened.
If the vehicle is locked with the integrated key

via the door lock, the alarm system will not be

activated.

Seite 103

Opening and closing

CONTROLS

103

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands