BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 167

Page: 167 / 444

Breaking-in period, refer to page

330

Functional requirement

Launch Control is available when the engine

is at operating temperature. The engine is at

operating temperature after an uninterrupted

trip of at least 6 miles/10 km.

Starting with launch control

Turn on drive-ready state.

Press the button.

TRACTION is displayed in the instrument

cluster and the indicator light for DSC OFF

lights up.

Engage selector lever position S.

With the left foot, forcefully press down on

the brake.

Press and hold down the accelerator pedal

beyond the resistance point at the full throt-

tle position, kickdown.
A destination flag is displayed in the instru-

ment cluster.

The starting engine speed adjusts. Wait

briefly until the engine speed is constant.

Keep the accelerator pedal in this position.

Release the brake within 3 seconds after

the destination flag illuminates.
The vehicle accelerates.
Upshifting occurs automatically as long as

the destination flag is displayed and the ac-

celerator pedal is not released.

Repeated use during a trip

After Launch Control has been used, the trans-

mission must cool down for approx. 5 minutes

before Launch Control can be used again.

Launch Control adjusts to the surrounding

conditions, when used again.

After using Launch Control

To support driving stability, reactivate Dynamic

Stability Control as soon as possible.

System limits

An experienced driver may be able to achieve

better acceleration values in DSC OFF mode.

Seite 167

Driving

CONTROLS

167

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands