BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 366

Page: 366 / 444

Warning

Unsuitable wheel studs, such as single-sec-

tion wheel studs, may loosen or come off.

The wheel may come loose during driving.

There is a risk of accident. Use only two-sec-

tion wheel studs that have been categorized

as suitable for the respective wheel type by

the manufacturer of the vehicle.

Recommended tire brands

For each tire size, the manufacturer of the ve-

hicle recommends certain tire brands. The tire

brands can be identified by a star on the tire

sidewall.

New tires

Tire traction is not optimal due to manufactur-

ing circumstances when tires are brand new.
Drive conservatively for the first

200 miles/300 km.

Retreaded tires

Warning

Retreated tires can have different tire casing

structures. With advanced age the service life

can be limited. There is a risk of accident.

The manufacturer of the vehicle does not rec-

ommend the use of retreaded tires.

Winter tires

General information

Winter tires are recommended for operating on

winter roads.
Winter tires can be identified by the icon with

mountain and snowflake, as well as the M+S

marking on the tire sidewall.

All-season tires with the M+S designation, but

without icon with mountain and snowflake,

have better winter characteristics than summer

tires but generally do not achieve the perform-

ance of winter tires.

Maximum speed of winter tires

If the maximum speed of the vehicle is higher

than the permissible speed for the winter tires,

then attach a sign showing the permissible

maximum speed in the field of vision. The sign

is available from an authorized service center

or another qualified service center or repair

shop.
With winter tires mounted, observe and do not

exceed the permissible maximum speed.

Changing runflat tires

When changing from runflat tires to standard

tires, it must be ensured that the vehicle con-

tains an emergency wheel or tire mobility kit.

Further information is available from an au-

thorized service center or another qualified

service center or repair shop.

Seite 366

MOBILITY

Wheels and tires

366

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands