BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 172

Page: 172 / 444

Set departure time

354

Maximum electrical range

353

Pre-conditioning

354

Current charge state

353

Displays of the hybrid

system

Displays in the instrument cluster

General information

The following functions of the hybrid system

are displayed:

▷

High-voltage battery charge state indicator.

▷

Drive-ready state: READY.

▷

Electric driving: ELECTRIC.

▷

Electric driving: ELECTRIC INDIVIDUAL.

▷

Hybrid mode: HYBRID STANDARD.

▷

Hybrid mode: HYBRID ECO PRO.

▷

BATTERY CONTROL.

The display depends on the system's operat-

ing condition.

High-voltage battery charge state

indicator

Principle

Indicates the current charge state of the high-

voltage battery as a percentage.

Safety information

Warning

Even when it is indicated that the high-volt-

age battery is discharged, the high-voltage

system is always still under high voltage.

There is a risk of fire or a risk of injury. Do

not touch or change live parts, e.g., orange

high-voltage cables, even when the batteries

are discharged.

Display

▷

Electric range, arrow 1.

▷

Current charge state, arrow 2.

▷

Adjusted charge state of the BATTERY

CONTROL function, arrow 3.

Drive-ready state: READY

READY indicates the drive-

ready state.

Additional information:
Drive-ready state, refer to page

Electric driving: ELECTRIC

The display becomes active af-

ter ELECTRIC is activated via

Driving Dynamics Control.

Additional information:
Driving Dynamics Control, refer to page

152

Seite 172

CONTROLS

Displays

172

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands