180
TERMINAL SERVERS
SERVER KEEPALIVE TIMER (privileged, 4- and 8-port models only)
{SET
}
{DEFINE
} SERVER KEEPALIVE [TIMER]
seconds
{CHANGE
}
This is a privileged LAT protocol command that designates the interval
between messages for LAT circuits on which no data is being transmitted.
The range is from 10 to 180 seconds while the default is 20 seconds.
Restriction
• The SET command cannot be used with this parameter while LAT sessions
are active.
SERVER LOCK (privileged)
{SET
}
{DEFINE
} SERVER LOCK {ENABLED }
{CHANGE
}
{DISABLED}
This privileged command indicates if the LOCK command can be accessed
by interactive port users. The default is ENABLED.
SERVER LOGIN PASSWORD (privileged)
{SET
}
{DEFINE
} SERVER LOGIN PASSWORD ["
password
"]
{CHANGE
}
This is a privileged command that designates a password that interactive
users are required to use during Terminal Server login. The port
characteristic PASSWORD must be specified as ENABLED to obtain the
password prompt at port login.
The password value can be omitted when LOGIN PASSWORD is the only
characteristic in the command line. Then the Terminal Server prompts for
the password.
ACCESS is the default password and is operative when the Terminal Server
is delivered or when the Terminal Server characteristics are reset to their
default values.
Summary of Contents for LE2101A-BT-R2
Page 2: ......
