manualshive.com logo in svg

Black Box LE2101A-BT-R2, Manual

The Black Box LE2101A-BT-R2 is a cutting-edge device that offers exceptional functionality. It comes with an easy-to-understand manual, allowing users to make the most of its features. You can conveniently download this user manual for free from our website, ensuring a seamless setup and operation experience of this remarkable product.

Share
Download
background image

128

TERMINAL SERVERS

AUTHENTICATION RETRIES (privileged)

{SET

}

{DEFINE

}AUTHENTICATION RETRIES

count

{CHANGE

}

This privileged command specifies the number of times the Terminal

Server will retry to send a message to the authentication server. Once this
count is reached, the Terminal Server will either try to use the alternate server
(if configured), or will reject the user login request.

count

This parameter specifies the number of retries. The allowed range is 2-10.
The default is 5.

AUTHENTICATON SECRET (privileged)

{SET

}

{DEFINE

}AUTHENTICATION{PRIMARY }SECRET 

secret

{CHANGE

}

{ALTERNATE

}

This privileged command specifies the secret password that is used by the

Terminal Server when communicating with the RADIUS authentication
server. This secret should be configured both in the Terminal Server and 
in the RADIUS server.

PRIMARY

This parameter specifies that the secret is configured for the primary
authentication server.

ALTERNATE

This parameter specifies that the secret is configured for the alternate
authentication server.

secret

The secret used with the specified authentication server. 1-16 case sensitive
characters.

Summary of Contents for LE2101A-BT-R2













































































































































































































































Reviews:

No comments

Related manuals for LE2101A-BT-R2

Vecow ECS-9210 User Manual preview
ECS-9210
Brand: Vecow Pages: 122
ImageTech printWiFi User Manual preview
printWiFi
Brand: ImageTech Pages: 44
AIC SB401-MN User Manual preview
SB401-MN
Brand: AIC Pages: 88
IBM 8676 - Eserver xSeries 335 Hardware Maintenance Manual And Troubleshooting Manual preview
8676 - Eserver xSeries 335
Brand: IBM Pages: 172
Supero SUPERSERVER 5018D-MF User Manual preview
SUPERSERVER 5018D-MF
Brand: Supero Pages: 120
IBM 8678 Installation And User Manual preview
8678
Brand: IBM Pages: 96
Digi PortServer/16 User Manual preview
PortServer/16
Brand: Digi Pages: 118
NEC Express5800 120Ed Release Note preview
Express5800 120Ed
Brand: NEC Pages: 8
NEC Express320F Brochure & Specs preview
Express320F
Brand: NEC Pages: 2
NEC Express5800 320La Release Note preview
Express5800 320La
Brand: NEC Pages: 18
NEC Express5800 120Lh Release Note preview
Express5800 120Lh
Brand: NEC Pages: 6
NEC EXPRESS5800/120Rd-1 Service Manual preview
EXPRESS5800/120Rd-1
Brand: NEC Pages: 70
NEC Express5800/1080Rf Brochure & Specs preview
Express5800/1080Rf
Brand: NEC Pages: 12
NEC EXPRESS5800/120Ed User Manual preview
EXPRESS5800/120Ed
Brand: NEC Pages: 138
NEC EXPRESS5800/120Ef Service Manual preview
EXPRESS5800/120Ef
Brand: NEC Pages: 64
NEC EXPRESS5800/120Le User Manual preview
EXPRESS5800/120Le
Brand: NEC Pages: 162
NEC Express5800/1020Ba User Manual preview
Express5800/1020Ba
Brand: NEC Pages: 142
NEC EXPRESS5800/120Ld Service Manual preview
EXPRESS5800/120Ld
Brand: NEC Pages: 194

Brands by name

Popular brands

Load more brands