127
TERMINAL SERVERS
The username and password are either requested by the a prompt (for
users accessing the server in terminal mode), or by using PPP PAP or CHAP
protocols. Please note that each port should be defined with PORT
AUTHENTICATION ENABLED in order for the authentication process
to take place.
ENABLED
Use the RADIUS protocol to authenticate users for each port configured with
PORT AUTHENTICATION ENABLED.
DISABLED
Do not use the RADIUS protocol to authenticate users. This is the default.
AUTHENTICATION ADDRESS (privileged)
{SET
}
{DEFINE }AUTHENTICATION{PRIMARY }ADDRESS
ip-address
{CHANGE}
{ALTERNATE}
This privileged command specifies the addresses of the primary and
alternate RADIUS authentication servers. During the verification of the user’s
name and password, the Terminal Server will send an authentication request
to the primary authentication server. If it does not get a response, it will retry
it again. The timeout value and the retries count can be configured with the
AUTHENTICATION TIMEOUT and AUTHENTICATION RETRIES
commands. Once the retries has reached the limit, the Terminal Server
will try to access the alternate server and repeat the process again.
PRIMARY
This parameter specifies that the address is configured for the primary
authentication server.
ALTERNATE
This parameter specifies that the address is configured for the alternate
authentication server.
ip-address
The Internet (IP) address of the authentication server.
Summary of Contents for LE2101A-BT-R2
Page 2: ......
