manualshive.com logo in svg

Black Box LE2101A-BT-R2, Manual

The Black Box LE2101A-BT-R2 is a cutting-edge device that offers exceptional functionality. It comes with an easy-to-understand manual, allowing users to make the most of its features. You can conveniently download this user manual for free from our website, ensuring a seamless setup and operation experience of this remarkable product.

Share
Download
background image

125

TERMINAL SERVERS

ACCOUNTING RETRIES (privileged)

{SET

}

{DEFINE

}ACCOUNTING RETRIES

count

{CHANGE

}

This privileged command specifies the number of times the Terminal

Server will retry to send a message to the accounting server. Once this count is
reached, the Terminal Server will either try to use the alternate server, or will
reject the user login request.

count

This parameter specifies the number of retries. The allowed range is 2 - 10.
The default is 5.

ACCOUNTING SECRET

{SET

}

{DEFINE

}ACCOUNTING{PRIMARY

}SECRET 

secret

{CHANGE

}

{ALTERNATE }

This privileged command specifies the secret password that is used by the

Terminal Server when communicating with the RADIUS ACCOUNTING
server. This secret should be configured both in the Terminal Server and in
the RADIUS server.

PRIMARY

This parameter specifies that the secret is configured for the primary
ACCOUNTING server.

ALTERNATE

This parameter specifies that the secret is configured for the alternate
ACCOUNTING server.

secret

The secret used with the specified ACCOUNTING server. 1-16 case sensitive
characters.

Summary of Contents for LE2101A-BT-R2













































































































































































































































Reviews:

No comments

Related manuals for LE2101A-BT-R2

xFusion Digital Technologies FusionServer CH242 V5 Manual preview
FusionServer CH242 V5
Brand: xFusion Digital Technologies Pages: 61
Sun Microsystems Sun Fire X4250 Volume Configuration Manual preview
Sun Fire X4250
Brand: Sun Microsystems Pages: 12
IOGear GPSU21 Installation Manual preview
GPSU21
Brand: IOGear Pages: 48
StarTech.com SV1115IPEXT Instruction Manual preview
SV1115IPEXT
Brand: StarTech.com Pages: 67
Planet FPS-1101 User Manual preview
FPS-1101
Brand: Planet Pages: 83
XtendLan IVS-170BA User Manual preview
IVS-170BA
Brand: XtendLan Pages: 34
XtendLan IVS-184CPW User Manual preview
IVS-184CPW
Brand: XtendLan Pages: 51
Bosanova WTC-350 Specifications preview
WTC-350
Brand: Bosanova Pages: 2
Bosanova LTC-1300 Specifications preview
LTC-1300
Brand: Bosanova Pages: 2
Bosanova 7716 Specifications preview
7716
Brand: Bosanova Pages: 2
Comtrol DeviceMaster PRO Installation And Configuration Manual preview
DeviceMaster PRO
Brand: Comtrol Pages: 174
Gigabyte G481-HA0-00 Assembly Notice preview
G481-HA0-00
Brand: Gigabyte Pages: 21
Supermicro SuperStorageSystem SSG-2028R-DN2R40L User Manual preview
SuperStorageSystem SSG-2028R-DN2R40L
Brand: Supermicro Pages: 84
TAG SV-4002-X2 Operation Manual preview
SV-4002-X2
Brand: TAG Pages: 54
TAG CENTRIX SV-2000-X2 Operation Manual preview
CENTRIX SV-2000-X2
Brand: TAG Pages: 82
SSS Siedle Access Server M Upgrade Instructions preview
Access Server M
Brand: SSS Siedle Pages: 28
Cooper Bussmann BU-945U-E User Manual preview
BU-945U-E
Brand: Cooper Bussmann Pages: 82
Optibase MGW 2400 User Manual preview
MGW 2400
Brand: Optibase Pages: 156

Brands by name

Popular brands

Load more brands