manualshive.com logo in svg

Black Box LE2101A-BT-R2, Manual

The Black Box LE2101A-BT-R2 is a cutting-edge device that offers exceptional functionality. It comes with an easy-to-understand manual, allowing users to make the most of its features. You can conveniently download this user manual for free from our website, ensuring a seamless setup and operation experience of this remarkable product.

Share
Download
background image

15

TERMINAL SERVERS

2.2  Remote Access Server

The Remote Access facility of the Terminal Server allows remote TCP/IP
stations connected via modems to the PSTN (Public Switched Telephone
Network) to access a LAN-based TCP/IP network. This dialup method of
connection uses either SLIP (Serial Line IP) or PPP (Point-to-Point Protocol)
to allow the remote station (for example, a PC or a UNIX workstation) to
become a native member of the central network to which the Terminal Server
is connected.

In order to protect the central network from unauthorized access, the

RADIUS (Remote Authentication Dial-In User Service) protocol is imple-
mented by the Terminal Server. RADIUS provides central user-authentication
and accounting services and supports the PAP (Password Authentication
Protocol) and CHAP (Challenge-Handshake Authentication Protocol) 
sub-protocols of PPP.

2.3  Available Models

The following models are available:

• Single-Port Terminal Server (10BASE-T) (part number LE2101A-T-R2)

• Single-Port Terminal Server (10BASE-T/BNC) (part number 

LE2101A-BT-R2)

• Terminal Server/4 TCP/IP (AUI) (part number LE2104A-AUI-R2)

• Terminal Server/4 TCP/IP (BNC) (part number LE2104A-BNC-R2)

• Terminal Server/4 TCP/IP (TP) (part number LE2104A-TP-R2)

• Terminal Server/4 TCP/LAT (AUI) (part number LE2204A-AUI-R2)

• Terminal Server/4 TCP/LAT (BNC) (part number LE2204A-BNC-R2)

• Terminal Server/4 TCP/LAT (TP) (part number LE2204A-TP-R2)

• Terminal Server/8 TCP/IP (AUI) (part number LE2508A-AUI-R2)

• Terminal Server/8 TCP/IP (BNC) (part number LE2508A-BNC-R2)

• Terminal Server/8 TCP/IP (TP) (part number LE2508A-TP-R2)

• Terminal Server/8 TCP/LAT (AUI) (part number LE2608A-AUI-R2)

• Terminal Server/8 TCP/LAT (BNC) (part number LE2608A-BNC-R2)

• Terminal Server/8 TCP/LAT (TP) (part number LE2608A-TP-R2)

Summary of Contents for LE2101A-BT-R2













































































































































































































































Reviews:

No comments

Related manuals for LE2101A-BT-R2

Longshine LCS-C844 User Manual preview
LCS-C844
Brand: Longshine Pages: 56
Surveon EonServ 5000 Series User Manual preview
EonServ 5000 Series
Brand: Surveon Pages: 33
Citrix NetScaler MPX 25100 40G Quick Start Manual preview
NetScaler MPX 25100 40G
Brand: Citrix Pages: 15
Supero SUPERSERVER 6028TP-HTFR User Manual preview
SUPERSERVER 6028TP-HTFR
Brand: Supero Pages: 141
Sun Microsystems Netra T2000 Service Manual preview
Netra T2000
Brand: Sun Microsystems Pages: 138
360 Systems MAXX-1200-HD Operation Manual preview
MAXX-1200-HD
Brand: 360 Systems Pages: 148
Abit SI-2PS User Manual preview
SI-2PS
Brand: Abit Pages: 56
Autonomic Mirage MMS-1e Setup Manual preview
Mirage MMS-1e
Brand: Autonomic Pages: 17
Supero SUPERSERVER 5014C-MT User Manual preview
SUPERSERVER 5014C-MT
Brand: Supero Pages: 112
PRG MBOX 2016 Hardware Manual preview
MBOX 2016
Brand: PRG Pages: 50
Meinberg TCR167PCI Operating Instructions Manual preview
TCR167PCI
Brand: Meinberg Pages: 34
3onedata NP5100 Series Quick Installation Manual preview
NP5100 Series
Brand: 3onedata Pages: 4
Supero AS2021M-UR Plus User Manual preview
AS2021M-UR Plus
Brand: Supero Pages: 104
Supero AS2021M-82R+ User Manual preview
AS2021M-82R+
Brand: Supero Pages: 104
Supero AS-1041M-T2 Plus User Manual preview
AS-1041M-T2 Plus
Brand: Supero Pages: 98
Supero 7047AX-72RF User Manual preview
7047AX-72RF
Brand: Supero Pages: 135
Supero 8047R-7JRFT User Manual preview
8047R-7JRFT
Brand: Supero Pages: 140
Tektronix MSO54 Programmer'S Manual preview
MSO54
Brand: Tektronix Pages: 1026

Brands by name

Popular brands

Load more brands