manualshive.com logo in svg

Black Box LE2101A-BT-R2, Manual

The Black Box LE2101A-BT-R2 is a cutting-edge device that offers exceptional functionality. It comes with an easy-to-understand manual, allowing users to make the most of its features. You can conveniently download this user manual for free from our website, ensuring a seamless setup and operation experience of this remarkable product.

Share
Download
background image

104

TERMINAL SERVERS

NODE 

node-name

Indicates a particular service node to which you want to connect. The

default node is the highest-rated node that offers the service.

DESTINATION 

port-name

Specifies a particular Terminal Server port to which you want to connect.

The default port you are connected to is the first available port offering the
service. If DESTINATION is specified without specifying NODE, users are
connected to the specified port on the local Terminal Server node, assuming
the service is offered.

PORT

This command connects you with the port’s preferred service.

Examples

Local> CONNECT
Local> CONNECT ADMIN
Local> CONNECT METDATA NODE DATAserver DESTINATION
PORT_6

If a preferred service is defined, the first command connects the port to 

its preferred service; the second command connects the port to the service
ADMIN; and the last command connects the port to the service METDATA 
at PORT 6 on the Terminal Server DATAserver.

CONNECT ANY (secure)

CONNECT {ANY}{

host-name

}

This command determines whether a specified host is using the Telnet or

LAT protocol. First the Terminal Server checks the Telnet protocol. If that
fails, the Terminal Server then checks the LAT protocol. The Terminal Server
establishes a connection to that host when a protocol is found. This command
is available to all users.

The keyword ANY can be omitted from the command line if ANY is already

set as the default protocol for the port. The host-name may be omitted from
the command line if the host-name has been set as a preferred service.

host-name

Indicates the name of the LAT service or the Telnet host to which you want

to connect.

Summary of Contents for LE2101A-BT-R2













































































































































































































































Reviews:

No comments

Related manuals for LE2101A-BT-R2

IBM Flex System x440 Compute Node Installation And Service Manual preview
Flex System x440 Compute Node
Brand: IBM Pages: 584
HPE SimpliVity 2600 Gen10 Installation And Maintenance Manual preview
SimpliVity 2600 Gen10
Brand: HPE Pages: 37
NEC N8100-1056F User Manual preview
N8100-1056F
Brand: NEC Pages: 408
IBM 9123710 - eServer OpenPower 710 Introduction Manual preview
9123710 - eServer OpenPower 710
Brand: IBM Pages: 70
LaCie LaCinema PlayHD Datasheet preview
LaCinema PlayHD
Brand: LaCie Pages: 2
HP LaserJet 4200/n Installation Manual preview
LaserJet 4200/n
Brand: HP Pages: 28
HP Jetdirect 2700w Setup Manual preview
Jetdirect 2700w
Brand: HP Pages: 43
HP Jetdirect 2900nw Manual preview
Jetdirect 2900nw
Brand: HP Pages: 20
HP LaserJet 4200/n Install Manual preview
LaserJet 4200/n
Brand: HP Pages: 36
HP wp110 - 802.11b Wireless Print Server Configuration Manual preview
wp110 - 802.11b Wireless Print Server
Brand: HP Pages: 35
HP JetDirect Ew2500 Specifications preview
JetDirect Ew2500
Brand: HP Pages: 2
HP SDCAB0801 User Manual preview
SDCAB0801
Brand: HP Pages: 18
HP SDCAB0803 User Manual preview
SDCAB0803
Brand: HP Pages: 25
HP Jetdirect J7974E Administrator'S Manual preview
Jetdirect J7974E
Brand: HP Pages: 186
HP LaserJet 4250 User Manual preview
LaserJet 4250
Brand: HP Pages: 223
HP Jetdirect 640n Administrator'S Manual preview
Jetdirect 640n
Brand: HP Pages: 228
HP Jetdirect J7949e Administrator'S Manual preview
Jetdirect J7949e
Brand: HP Pages: 232
IBM eserver xSeries 350 User Reference Manual preview
eserver xSeries 350
Brand: IBM Pages: 174

Brands by name

Popular brands

Load more brands