163
TERMINAL SERVERS
PORT PPP LCP/IPCP MAXFAILURE
{SET
}
{DEFINE
}PORT [PPP]
{LCP }MAXFAILURE nn
{CHANGE
}
{IPCP}
This option determines how many times LCP, IPCP, or ATCP will send a
negative acknowledgment message (NAK) for the peer’s proposed options
before deciding to start rejecting the problem options (the options whose
values the LCP/IPCP finds objectionable).
Once LCP/IPCP rejects the problem options, either the link establishment
will fail or the options must take on the default value. The default value for
this characteristic is 10.
Restriction:
• The DEFINE and CHANGE commands require a privileged status.
The SET command has a nonprivileged status.
PORT PPP LCP/IPCP MAXTERMINATE
{SET
}
{DEFINE
}PORT [PPP]
{LCP }MAXTERMINATE nn
{CHANGE
}
{IPCP}
This option determines how many times the LCP, IPCP, or ATCP will send
a terminate request packet to the peer without receiving a terminate
acknowledgment signal. A takedown of the link will result from the failure
of the peer to send an acknowledgment signal after the assigned number of
request packets. The default number of request packets is 2.
Restriction
• The DEFINE and CHANGE commands require a privileged status.
The SET command has a nonprivileged status.
Summary of Contents for LE2101A-BT-R2
Page 2: ......
