manualshive.com logo in svg

Black Box LE2101A-BT-R2, Manual

The Black Box LE2101A-BT-R2 is a cutting-edge device that offers exceptional functionality. It comes with an easy-to-understand manual, allowing users to make the most of its features. You can conveniently download this user manual for free from our website, ensuring a seamless setup and operation experience of this remarkable product.

Share
Download
background image

105

TERMINAL SERVERS

Restriction:

• This command cannot be used if AUTOCONNECT is ENABLED on the

port.

Example

Local> CONNECT ANY JUMBO

This command checks the host JUMBO to determine whether the Telnet
protocol or the LAT protocol is used and then connects to the host JUMBO.

CONNECT PPP (secure)

CONNECT [PPP]

This secure command specifies that a PPP session will be started on the

port. You must specify PPP in the command line if PPP is not the default
protocol.

Restrictions:

• The port must have PPP enabled.

• Only one SLIP or PPP session per port is allowed at any given time.

• During a PPP session, all switch characters are passed on as data.

Example

Local> CONNECT PPP

This command starts a PPP session on the current port.

CONNECT SLIP (secure)

CONNECT [SLIP]

This command, which is available to all users, specifies that a SLIP session

will be started on the port. If SLIP is not the default protocol, you must
specify SLIP in the command line.

NOTE

If a HOST ADDRESS has not been set prior to entering the CONNECT
SLIP command, the access server will determine the address from the
first internet packet received on the port.

Summary of Contents for LE2101A-BT-R2













































































































































































































































Reviews:

No comments

Related manuals for LE2101A-BT-R2

Kontron CG2100 Installation And Maintenance Manual preview
CG2100
Brand: Kontron Pages: 110
ACE COMPUTERS PW-GT20 User Manual preview
PW-GT20
Brand: ACE COMPUTERS Pages: 32
Video Server 4 Ch Video Sever User Manual preview
4 Ch Video Sever
Brand: Video Server Pages: 34
BITMAIN ANTMINER S19a Pro Installation Manual preview
ANTMINER S19a Pro
Brand: BITMAIN Pages: 17
Oce Repro Desk User Manual preview
Repro Desk
Brand: Oce Pages: 464
Promise Technology VessRAID 1740s Product Manual preview
VessRAID 1740s
Brand: Promise Technology Pages: 324
Advantech ASR-3100PP-R11A1E User Manual preview
ASR-3100PP-R11A1E
Brand: Advantech Pages: 86
Advantech DNS-3200 User Manual preview
DNS-3200
Brand: Advantech Pages: 110
Supermicro H8DC8 User Manual preview
H8DC8
Brand: Supermicro Pages: 78
Red Hat DIRECTORY SERVER 7.1 Administrator'S Manual preview
DIRECTORY SERVER 7.1
Brand: Red Hat Pages: 652
Seeed reServer User Manual preview
reServer
Brand: Seeed Pages: 9
Adaptec Snap Server 18000 Manual preview
Snap Server 18000
Brand: Adaptec Pages: 5
HP Enterprise ProLiant DL20 Gen9 User Manual preview
ProLiant DL20 Gen9
Brand: HP Enterprise Pages: 124
Oracle netra X5-2 Security Manual preview
netra X5-2
Brand: Oracle Pages: 22
FieldServer QuickServer 1011 Startup Manual preview
QuickServer 1011
Brand: FieldServer Pages: 44
Gigabyte GS-SR101T System Installation Manual preview
GS-SR101T
Brand: Gigabyte Pages: 24
Gigabyte R183-S94-AAC1 User Manual preview
R183-S94-AAC1
Brand: Gigabyte Pages: 111
LaCie 301346U - Big Disk Network NAS Server User Manual preview
301346U - Big Disk Network NAS Server
Brand: LaCie Pages: 47

Brands by name

Popular brands

Load more brands