manualshive.com logo in svg

Black Box LE2101A-BT-R2, Manual

The Black Box LE2101A-BT-R2 is a cutting-edge device that offers exceptional functionality. It comes with an easy-to-understand manual, allowing users to make the most of its features. You can conveniently download this user manual for free from our website, ensuring a seamless setup and operation experience of this remarkable product.

Share
Download
background image

84

TERMINAL SERVERS

Terminal Servers working with modems operate as RADIUS clients. The

RADIUS client sends authentication requests to the RADIUS server which
responds accordingly.

The protocol defines two entities:

• RADIUS Client—a device that needs authentication services. The

Terminal Server, for example, functions as a RADIUS client.

• RADIUS Server—a device that receives authentication requests from

RADIUS clients and responds either with Accept (authentication
validated) or Reject (authentication failed). The RADIUS server is usually
implemented on UNIX workstations and is downloadable as free public
domain for most UNIX and also for Windows NT operating systems.

The RADIUS clients communicate with the RADIUS server using UDP.

Many separate RADIUS clients may use the services of a single RADIUS server,
even when the server is connected to a different network. The fact that the
RADIUS server can be centralized allows the system administrator to define
the users and password data bases in one place only and to avoid having to
define every user individually in every distinct Terminal Server.

Summary of Contents for LE2101A-BT-R2













































































































































































































































Reviews:

No comments

Related manuals for LE2101A-BT-R2

Supero SUPERO SuperServer 6026TT-GIBQRF User Manual preview
SUPERO SuperServer 6026TT-GIBQRF
Brand: Supero Pages: 104
Blackberry Enterprise Server Upgrade Manual preview
Enterprise Server
Brand: Blackberry Pages: 88
Avaya Virtual Services Platform 7000 Series Troubleshooting Manual preview
Virtual Services Platform 7000 Series
Brand: Avaya Pages: 103
Patton electronics PeNet 2127 User Manual preview
PeNet 2127
Brand: Patton electronics Pages: 16
xFusion Digital Technologies FusionServer 5288 V6 Manual preview
FusionServer 5288 V6
Brand: xFusion Digital Technologies Pages: 131
AIC SB302-LB User Manual preview
SB302-LB
Brand: AIC Pages: 101
Mitsubishi Electric MES3-255C-DM-EN User Manual preview
MES3-255C-DM-EN
Brand: Mitsubishi Electric Pages: 48
Mitsubishi Electric apricot FTs 486 Add-On Installation Manual preview
apricot FTs 486
Brand: Mitsubishi Electric Pages: 17
Mitsubishi Electric DX-VS1UE Setup Manual preview
DX-VS1UE
Brand: Mitsubishi Electric Pages: 32
Mitsubishi Electric FT5000 Handbook preview
FT5000
Brand: Mitsubishi Electric Pages: 117
Bosanova WTC-350 Specifications preview
WTC-350
Brand: Bosanova Pages: 2
Bosanova LTC-1300 Specifications preview
LTC-1300
Brand: Bosanova Pages: 2
Bosanova 7716 Specifications preview
7716
Brand: Bosanova Pages: 2
Black Box les1208A Manual preview
les1208A
Brand: Black Box Pages: 4
Black Box LES1202A Quick Start Manual preview
LES1202A
Brand: Black Box Pages: 12
Black Box RAS-PutIn Installation And User Manual preview
RAS-PutIn
Brand: Black Box Pages: 93
Meinberg LANTIME M600 MRS User Manual preview
LANTIME M600 MRS
Brand: Meinberg Pages: 160
Supermicro SuperServer 520P-WTR User Manual preview
SuperServer 520P-WTR
Brand: Supermicro Pages: 114

Brands by name

Popular brands

Load more brands