manualshive.com logo in svg

Black Box LE2101A-BT-R2, Manual

The Black Box LE2101A-BT-R2 is a cutting-edge device that offers exceptional functionality. It comes with an easy-to-understand manual, allowing users to make the most of its features. You can conveniently download this user manual for free from our website, ensuring a seamless setup and operation experience of this remarkable product.

Share
Download
background image

94

TERMINAL SERVERS

Terminal Server is important to comprehend and a correct grasp of these
concepts will allow trouble-free and effortless operations.

Certain control characters allow the user to circulate between sessions

and to control each one in turn. These include controls for breaking out 
of sessions, terminating sessions, and switching between active sessions.

5.1 Terminal Sessions

S

TARTING A

S

ESSION

The CONNECT command is used to connect to remote hosts. For LAT
services, issue the CONNECT

service_name

command. For Telnet hosts, the

equivalent would be CONNECT TELNET

host_name

, or even TELNET

host_name

. An explicit IP number can be substituted for the 

host_name

and an

explicit port number can also be added. For example, to connect to port 2005
of host 111.122.133.144.

Local>TELNET 111.122.133.144.2005

N

AVIGATION

B

ETWEEN

S

ESSIONS

The <break> key switches the user back to 

local

mode while keeping any

current sessions alive in the background.

Once in local mode, you can use the FORWARDS and BACKWARDS

commands to step through active sessions. Specific keys can be assigned as
shortcuts to these commands. The first session initiated by the user is at the
start of the session list. The SHOW SESSIONS command displays a list of the
open sessions. FORWARDS brings the most recent session forward. The list is
cyclic. Note that up to 4 active sessions can be maintained by each port of the
Terminal Server.

NOTE

Do not assign the <break>, <forwards>, and <backwards> keys to
common keys that are used in normal terminal operations to prevent
them from being unintentionally activated.

Summary of Contents for LE2101A-BT-R2













































































































































































































































Reviews:

No comments

Related manuals for LE2101A-BT-R2

A10 Networks AX Series Deployment Manual preview
AX Series
Brand: A10 Networks Pages: 17
AIC CB201-Z1 User Manual preview
CB201-Z1
Brand: AIC Pages: 52
Patton electronics 3120 Administrator'S Reference Manual preview
3120
Brand: Patton electronics Pages: 331
Qlogic iSR6200 Quick Start Manual preview
iSR6200
Brand: Qlogic Pages: 20
IBM DB2 9 Planning Manual preview
DB2 9
Brand: IBM Pages: 51
AIC FB128-LX User Manual preview
FB128-LX
Brand: AIC Pages: 79
IBM 1-Port USB Print Server Hardware User'S Manual preview
1-Port USB Print Server
Brand: IBM Pages: 15
Infrant Technologies ReadyNAS NV Getting Started Manual preview
ReadyNAS NV
Brand: Infrant Technologies Pages: 8
SpectraLink DECT Server 2500 Interoperability Manual preview
DECT Server 2500
Brand: SpectraLink Pages: 27
AMX Multimedia Server MAX MMS-04S Installation Manual preview
Multimedia Server MAX MMS-04S
Brand: AMX Pages: 2
Gigabit Sistems MFPR-3100 Instruction Manual preview
MFPR-3100
Brand: Gigabit Sistems Pages: 58
TROY Group TROY200 Series Installation And User Manual preview
TROY200 Series
Brand: TROY Group Pages: 34
Oracle SUN Fire X4640 Diagnostics Manual preview
SUN Fire X4640
Brand: Oracle Pages: 44
tactio MICO-PS-3P User Manual preview
MICO-PS-3P
Brand: tactio Pages: 38
IBM BladeCenter HX5 Installation And User Manual preview
BladeCenter HX5
Brand: IBM Pages: 142
Moxa Technologies CN2500 Quick Installation Manual preview
CN2500
Brand: Moxa Technologies Pages: 14
Moxa Technologies NPort User Manual preview
NPort
Brand: Moxa Technologies Pages: 122
Digi PortServer II User Manual preview
PortServer II
Brand: Digi Pages: 277

Brands by name

Popular brands

Load more brands