manualshive.com logo in svg

Black Box LE2101A-BT-R2, Manual

The Black Box LE2101A-BT-R2 is a cutting-edge device that offers exceptional functionality. It comes with an easy-to-understand manual, allowing users to make the most of its features. You can conveniently download this user manual for free from our website, ensuring a seamless setup and operation experience of this remarkable product.

Share
Download
background image

140

TERMINAL SERVERS

• You cannot use the SET or CHANGE 

port-list 

ACCESS DYNAMIC or

LOCAL command if any port in the 

port-list 

is defined as REMOTE 

or NONE.

PORT AUTHENTICATION (privileged)

{SET

}

{DEFINE

}PORT AUTHentication{ENABLED

}

{CHANGE

}

{DISABLED

}

This privileged command specifies whether the user login request to this

port will be authenticated. If this characteristic is enabled, the user will be
prompted to enter a username and a password (in terminal mode), or go
through PAP/CHAP process in PPP mode. In addition, it overrides the PORT
PASSWORD verification.

Only if PORT AUTHENTICATION is set to DISABLE, the PORT

PASSWORD option may be used.

ENABLED

Authenticate user login requests for this port—verify the username and
password.

DISABLED

Do not authenticate user login on this port. This is the default.

Summary of Contents for LE2101A-BT-R2













































































































































































































































Reviews:

No comments

Related manuals for LE2101A-BT-R2

IBM Flex System x240 Compute Node Product Manual preview
Flex System x240 Compute Node
Brand: IBM Pages: 28
Oki ML590 Specification Sheet preview
ML590
Brand: Oki Pages: 2
Supermicro SuperServer E300-9A-4C User Manual preview
SuperServer E300-9A-4C
Brand: Supermicro Pages: 109
Brocade Communications Systems DCX 8510-8 Hardware Reference Manual preview
DCX 8510-8
Brand: Brocade Communications Systems Pages: 176
IBM X3850 X6 Installation And Service Manual preview
X3850 X6
Brand: IBM Pages: 1730
QNAP TVS- 72XU Series User Manual preview
TVS- 72XU Series
Brand: QNAP Pages: 56
EDSLab WiDRIVE User Manual preview
WiDRIVE
Brand: EDSLab Pages: 24
QNAP TS-409 User Manual preview
TS-409
Brand: QNAP Pages: 203
Lucidata Diplomat jr JRN-ASV User Manual preview
Diplomat jr JRN-ASV
Brand: Lucidata Pages: 32
EVS XT2+ Technical Reference Hardware Manual preview
XT2+
Brand: EVS Pages: 87
Supermicro A+ Server AS-E301-9D-8CN4 User Manual preview
A+ Server AS-E301-9D-8CN4
Brand: Supermicro Pages: 106
Adaptec 5325301843 Quick Start Manual preview
5325301843
Brand: Adaptec Pages: 7
Adaptec Snap Server 110 User Manual preview
Snap Server 110
Brand: Adaptec Pages: 74
Elastix NLX-miniUCS Appliance Quick Start Manual preview
NLX-miniUCS Appliance
Brand: Elastix Pages: 5
iServer MicroServer iTHX-W Firmware Upgrade Instructions preview
MicroServer iTHX-W
Brand: iServer Pages: 5
Lantronix WiPort NR User Manual preview
WiPort NR
Brand: Lantronix Pages: 72
Lantronix EDS3000PR Quick Start Manual preview
EDS3000PR
Brand: Lantronix Pages: 2
Oracle StorageTek 8 Gb FC PCIe HBA Installation Manual preview
StorageTek 8 Gb FC PCIe HBA
Brand: Oracle Pages: 40

Brands by name

Popular brands

Load more brands